TorquePRO | Torque System
TorquePRO
The Promess TorquePRO system is a fully electric, programmable, rotational actuator. Built to control torque and position in production and test environments.
The TorquePRO is the best solution for accurate and repeatable torque for manufacturing and test applications from 1 Nm and below, to over 15,000 Nm.
Control
- Highly Accurate Motion Control
- Real time control and monitoring of torque and angle
- Control to a Torque, Position, or any number of other inputs
Monitor
- Verify every process or test meets its requirements
- Manufacture with no fault forward
- Never ship a bad part from your facility again
Robust
- Built-in mechanical overload protection
- Hold the rated load of the system indefinitely
- Sleek, compact design allows for easy integration or retrofit
Features
Move to an angle
Move to a torque
Moves to multiple positions
Hold to a constant torque
Base mounts / face mount options
Smooth running servo technology
Easy integration
Benefits
PRECISE
Control allows for a high level of accuracy in force and position applications
PROGRAMMABLE
Control system and motion components work together in both simple and complex configurations
ENERGY EFFICIENT
Electric Presses are energy conscious and have high efficiency, only using power during the cycle
QUIET
Minimal / low noise pollution, only runs while in cycle
CLEAN
No fluids to replace, condition, or recover eliminating costly downtime
What is your application?
Talk to one of our expert engineers and learn more.
Monitoring Capabilities
Programmable Positions, Speed & Acceleration
Sensor / Signature Monitoring
Adjustable Process Limits & Tolerances
Display of Graphs, Zooming & Printing
Advanced Data Analysis
Gauging Functions
Pass / Fail Parts
Data Acquisition & Storage
System Powered By Promess Software
Promess powerful system software solution offers custom commands, flexible configurations, and adjustable features to address your specific needs.
Features of Promess Software
- Easy to Use
- Traceability
- Data History
TorquePRO Mechanics
Complete System
What’s Included
- Torque Module / Spindle Includes
- Integrated Torque Transducer
- Preamplifier
- Servo Motor & Amplifier
- Safety Drive Enclosure (SDE)
- Promess UltraPRO Controller
- Digital Signal Conditioner
- Cables
Flexible System Configurations
- Integrated Torque Spindle Package
- Integrated Torque Transducer
- Servo Motor
- Plug & Play Design
- Compact
- Torque Transducer is Mechanically Protected from Overload Conditions
- Easy to Couple to
- Integrated Angle / Position Sensing
- Flexible Mounting; Face or Base Mount Available
Torque Applications
Looking for a More Tailored Solution?
Looking for a plug and play systems that allows you to be up and running same day as delivery? Learn more about our Work Stations.
TorquePRO Sizing
| Torque Capacity (Nm) | Torque Capacity (lb-in) | Max Speed (RPM) |
|---|---|---|
| 5 | 44 | 250 |
| 20 | 177 | 250 |
| 50 | 442 | 250 |
| 100 | 885 | 250 |
| 200 | 1,770 | 250 |
| 500 | 4,425 | 100 |
| 1,000 | 8,851 | 75 |
| 2,500 | 22,127 | 20 |
| 5,000 | 44,254 | 10 |
| 10,000 | 88,507 | 4 |
Other sizes available upon request, email [email protected].
Drawings available upon request, email [email protected].
Prove Out Your Process
The PDC is available to you for help verifying your process at no cost to you. Bring in or send in your parts and work with an engineer to find the technology best suited for your application.
