Press Applications
EMAP Applications
Promess Electro-Mechanical Assembly Press (EMAP) Systems are used by Builders & End-Users in a broad range of testing, monitoring and assembly applications.
A few of these applications are listen below:
- Crimping
- Staking
- Joining
Press Application Examples
Press to a Shoulder
- Press to a Programmable Force
- Press to Rate of Change
- Gauge and Press to Shoulder
- Gauge Force and Position
Press to a Position
- Press to a Programmable Position
- Press to an External Sensor
- Press to Torque
- Press to Offset
Crimping / Staking
- Crimp to a Programmable Position
- Crimp to a Relative Distance
- Stake to a Dimension
- Single or Multiple Staking Points
Forming
- Press and Hold a Constant Force
- Press to Shape
- Press to Position
- Press to Thickness
Bending / Straightening
- Bend/Straighten to an External Measure
- Push and Pull to Bend/Straighten
- Gauge & make customized algorithms
Press to an External Transducer
- Press to Dimension (external probe)
- Press to Flow
- Press to External Force
- Press to Torque
Spring Test
- Measure Spring Rate
- Measure Spring Height at Defined Force
- Measure Spring Free Height
- Measure Spring Retention
Riveting
- Upset Rivet to a Force
- Upset Rivet to Position
- Upset Rivet to a Relative Dimension
- Upset Rivet to a Functionality Specification
Press Applications in Motion
Crimping
Bending
Forming
Pressing
Precise Positioning
Do You Have an Application?
Talk to one of our expert engineers or learn more about proving your application in our Process Development Center.
Controlling Control Arm Assembly
Assembling control arms for one of America’s most popular car manufacturers is a challenge at many levels for ZF at its Lapeer, MI, plant.
After this, the assembled components are tested for both location and function. Cycle time is only 10 seconds, meaning ZF must perform precise assembly at a high production rate.
To meet this challenge, the worldwide automotive supplier is using an advanced robotic assembly and test system developed by ESE LLC. The system was installed at the end of 2011, just in time to support the plant’s need to increase production.
PRESS CASE STUDIES
Application:
Hydraulic Press Valve Relief
Application:
Valve Seat & Guide Assembly
Application:
Power Steering Pump Assembly
Application:
Water Pump Assembly
Do You Have an Application?
Talk to one of our expert engineers or learn more about proving your application in our Process Development Center.